English
Luxury Whirlpool Bath
Fuzion™ Frame Installation
If you are installing a Fuzion™ bathtub with accessory |
|
frame, please refer to the Fuzion™ Frame Installation |
|
Guide (#GL44000) before proceeding any further. |
|
Complete the installation and assembly steps |
|
according to the Fuzion™ Frame Installation Guide. | Fuzion™ Frame |
|
Fuzion™ Control Panel Installation
The following cutouts must be clear and free of any dirt or adhesive:
- Control panel cutout in the assembled wood frame - Control panel cutout in the assembled counter
- Control panel cutout in the bathtub
1Insert the wire connector into the back of the control panel (Figure 4).
Control Box Wire
(Black Wire)
Figure 4 - Control Panel
Control Box Wire
Adhesive)
2Sparingly apply adhesive around the base of the control panel (Figure 5).
Figure 5 - Adhesive Application
3Thread the wire through the cutout and to the control box.
4Orient control panel in the following manner: the logo will be on the right side of the J4 control panel when you are sitting in the bathtub (the power button will be on the right side of the J5 LCD control panel).
5Lower the control panel into the cutout and press firmly to embed the adhesive (Figure 6).
6Connect the wire to the control box.
7Please proceed to Step 3 in the
Inside of Bathtub
Figure 6 - Control Panel
Page 10 | www.jacuzzi.com | Installation and Operation |