English
Luxury Whirlpool Bath
Chromatherapy or Allumitherapy (Light) Operation
Press light button 1st time:
Turns colored lighting ON, use up and down buttons to start color scroll or select alternate color.
Press light button 2nd time:
Turns white lighting ON, use up and down buttons to select intensity of white light.
Press light button 3rd time:
Turns all lighting OFF
Colored Lighting Operation
The colored lighting default is constant blue. Pressing the (+) button activates color scroll in this order: blue, teal, green, yellow, orange, red, pink, purple and then returns to blue and continuously repeats. To stop on a selected color, press the (+) button again. Pressing the
White Lighting Operation
There are five white light intensities. Press the (+) button to increase light intensity. Press the
Controlling Whirlpool Direction and Flow
Direction -
All Jacuzzi jets, except the rotating neck jets, can be driectionally adjusted. To change the direction of the water flow, swivel the jet nozzle to the desired angle. The jets can be directed individually toward any location on your body to provide a hydromassage.
The jets can also be adjusted so that they all point in the same direction (clockwise or counterclockwise) to circulate the water in a circular motion around the bath, causing a total whirlpool effect.
Water Force -
Most Jacuzzi jets are designed for flow adjustment. For robustMultidirectional Jets action, increase the force of the flow by rotating the nozzle, or
face, to the left (counterclockwise). For a more gentle effect, or to close off the jet, rotate the nozzle, or face, to the right (clockwise).
Closing one or more jets can increase the water force in the remaining jets.
The rotating neck jets, and some AccuPro™ jets, cannot be adjusted for water force.
Never run the whirlpool system with all the jets closed.
Page 18 | www.jacuzzi.com | Installation and Operation |