
Galaxy
Figure 5-8: Dislodging the PSU
Step 4. Gently pull the PSU module out of the chassis using the retention handle.
Step 5. Insert the replacement PSU module into the slot with the retention handle at its lowest position. Push the PSU in until you feel the contact resistance with its
Secure the PSU into the chassis slot. Make sure the saddle notches of the extraction handle lock onto the anchor pins on the interior walls of the module slot. Once in place, pull the extraction handle in an upward motion to secure the module.
Figure 5-9: Securing PSU Using the Extraction Handle
Subsystem Maintenance |