
Galaxy
4.5.4LCD Screen
When powering on the subsystem, the following messages should appear on the front panel LCD screen. Wait for the front panel LCD to show “READY” or “No Host LUN” before the host boots up.
Model Name
Ready |
Status/Data Transfer Indicator
Figure 4-14: The LCD Initial Screen
The LCD screen startup sequence is shown and described in the sequence below.
Initializing….
Please Wait...
Power On Self Test Please Wait…
Power on
Init Completed..
512MB RAM, Wait...
No Host LUN
Ready
This screen appears when the PSUs are turned on.
System is performing a self test.
System
System is accessing various interfaces.
Verifying installed memory.
System is ready. You can now start to configure the subsystem.
System is ready for I/Os.
Subsystem Connection and Operation |