3Com 3CBLSF26H manual Configuring Trust Mode, Configuring Bandwidth Settings

Table 3-44DSCP to Queue Summary Page item description

Item		Description
DSCP	Displays the incoming packet’s DSCP value.
CoS		Indicates the CoS value forwarding queue to which the DSCP priority is
		mapped. The possible field values are 0-7.

Configuring Trust Mode

The Trust Setup Page contains information for configuring trust mode on the switch.

Click Device > QoS > Trust > Setup. The Trust Setup Page opens.

Figure 3-56Trust Setup Page

The Trust Setup Page contains the following fields:

Table 3-45Trust Setup Page item description

Item	Description
	Specifies which packet fields to use for classifying packets entering the
	switch. When no rules are defined, the traffic containing the predefined
	packet CoS field is mapped according to the relevant trust modes table.
Trust Mode	Traffic not containing a predefined packet field is mapped to "best effort".
	The possible Trust Mode field values are:
	z CoS: Classifies traffic based on the CoS tag value.
	z DSCP: Classifies traffic based on the DSCP tag value.

Configuring Bandwidth Settings

Defining Bandwidth Settings

The Bandwidth Setup Page allows network managers to define the bandwidth settings for a specified interface.

Click Device > QoS > Bandwidth > Setup. The Bandwidth Setup Page opens.

3-51