3Com 3CBLSF26H manual Configuring CoS to Queue, Defining CoS to Queue, Hq-Wrr

Figure 3-51Queue Setup Page

The Queue Setup Page contains the following fields:

Table 3-40Queue Setup Page item description

Item	Description
	This highest queue is transmitted first if any packets are in the highest
HQ-WRR	queue. When the highest queue is exhausted, the remaining queues are
	served by WRR.
WRR(ratio	This queue algorithm specifies which port queue that each packet should be
	sent to. The actual bandwidth of each port queue is determined by the
1:2:10:15)
	weight, whose values are 1,2,10 and 15.

Configuring CoS to Queue

Defining CoS to Queue

The CoS to Queue Setup Page contains fields for mapping CoS values to traffic queues. Four traffic priority queues are supported on the switch, with 1 representing the lowest queue and four as the highest. The highest priority queue functions with strict priority while queues 1-3 function with WRR priority with the following weights (1, 2, 10 and 15) respectively.

Click Device > QoS > CoS to Queue > Setup. The CoS to Queue Setup Page opens.

Figure 3-52CoS to Queue Setup Page

The CoS to Queue Setup Page contains the following fields:

3-48