3Com 3CBLSF26H manual Configuring an Authentication Server, Configuring a User Account

Item	Description
	Set the authentication sleep period.
Sleep Period	5 minutes by default
	Note:
	Within the authentication sleep period, no users on this port are
	allowed to try to pass authentication.
	Set the aging time.
Aging time	1 hour by default
	Note:
	If there is no traffic of authenticated users through a port within the
	aging time, the port will be aged out and enters the Block state.
Ldb	Enable/disable the LDB feature on a port.
	Disabled by default

Configuring an Authentication Server

On this page, you can configure different authentication servers for different VLANs.

Select Security > LDB > Authentication IP. The Authentication Server Configuration Page Opens.

Figure 3-77Authentication server configuration page

Click Add, select the VLAN interface, and specify the authentication server IP address and subnet mask to establish an association between a VLAN and an authentication server, as shown in 0.

Figure 3-78Configure an authentication server

Configuring a User Account

On this page, you can configure user accounts for local authentication.

Select Security > LDB > User Configuration. The User Account Configuration Page Opens.

3-71