3Com 980-000077/002 manual 14CHAPTER 3 Routing IP

3-14CHAPTER 3: ROUTING IP

10Enter REM to establish a new remote management session.

11Enter PASSWORD at the Enter Password screen.

12Enter SAVE to save the new configuration.

Configure the ISDN Numbers Table

Set up the ISDN numbers table to associate the central site unit name with its ISDN number.

1Enter CO IS NU to display the ISDN Numbers screen.

2Enter ADD to add an entry to the ISDN Numbers table.

3Type the name assigned to the remote unit in the Name field and the ISDN number for that unit in the ISDN Number 1 field.

Unit names are case-sensitive and must be entered correctly.

4Type an IP address of 0.0.0.0 in the IP Address field if unnumbered links are to be used. Using unnumbered links is recommended for the most economical use of IP addresses.

5Type a subnet mask of 0.0.0.0 in the IP Mask field if unnumbered links are to be used.

6Type a number between 6 and 10 in the IP Hop Count field.

7Press [Ctrl]+[E] to submit the new setting and then enter SAVE

Configure the ISDN Autocall Table

Set up the ISDN Autocall table to associate the central site unit IP address with its name.

1Enter CO IS AUTO IP to display the ISDN IP Autocall Addresses screen.

2Enter ADD to add an entry to the ISDN IP Autocall table.

3Type the name of the central site unit in the Remote Unit field.

Unit names are case-sensitive and must be entered correctly.

4Type the IP address of the central site unit in the IP Address field.

5Type the subnet mask of the central site network in the IP Mask field.

6Press [Ctrl]+[E] to submit the new setting and then enter SAVE