ABOUT THIS GUIDE
About This Guide provides an overview of this guide, describes guide conventions and tells you where to look for specific information.
This guide describes the basic steps required to configure a unit to bridge or route IP or IPX data packets to a remote site using ISDN.
This guide is intended to be used by people with some technical competence. It is not intended for experienced network administrators configuring extensive and complex networks.
If the information in the release notes shipped with this product differs from the information in this guide, follow the instructions in the release notes.
Finding Specific Information in this Guide
This table shows the location of specific information in this guide.
If you are looking for: | Turn to: |
|
|
The scope of this guide and procedures prior to configuration. | Chapter 1 |
How to configure IP and bridging between a central site and a | Chapter 2 |
remote site. |
|
How to configure IP routing between a central site and a remote site | Chapter 3 |
How to configure IPX bridging between a central site and a remote | Chapter 4 |
site |
|
How to configure IPX routing between a central site and a remote site | Chapter 5 |
How to configure a PPP connection to an Internet Service Provider | Chapter 6 |
|
|
