Configuring a Central Site Unit for Routing IPX |
Configure the ISDN Numbers Table
Set up the ISDN numbers table to associate each remote unit name with an ISDN number.
1Enter CO IS NU to display the ISDN Numbers screen.
2Enter ADD to add a new entry to the numbers table.
3Type the name of the remote unit in the Name field.
Unit names are
4Type the ISDN number of the remote unit in the ISDN Number 1 field.
It is very important to remember that Novell IPX routing uses numbered links. This means that the ISDN line between this unit and a remote site represents an additional Novell network and has to be assigned a valid Novell network number.
5Type the IPX network address of the numbered link in the IPX Network field, not the IPX network address of the remote unit.
6Press [Ctrl]+[E] to submit the new setting and then enter SAVE
Enable IPX Routing
1Enter CO RO PA to display the Router Options screen.
2Toggle the IPX Routing field to ENABLED using the Spacebar.
3Press [Ctrl]+[E] to submit the new setting and then enter SAVE
Enable Novell RIP/SAP Learning
Novell RIP/SAP learning must be enabled at both ends of the link.
1Enter CO BR PA to display the Filter Parameters screen.
2Toggle the Learn Novell RIP/SAP field to ENABLE using the Spacebar.
3Press [Ctrl]+[E] to submit the new setting and then enter SAVE
The central site unit is now ready for routing the Novell IPX protocol.
