CORDLESS PHONE FOR MX-ONE™

Using the desk PDM charger for software download and synchronization of parameters is most often done by system administrators, and requires that the charger is connected either to the LAN and CPDM or to a PC with the WinPDM software application installed. For a short description of CPDM and WinPDM, see WinPDM and CPDM on page 125.

The desk PDM charger is connected to a PC through the USB or one of the network connectors, see figure 20 on page 121. When you connect the charger with a PC through one of the network connectors, the charger acts as a switch, making it possible to connect the other connector to the LAN.

Figure 20:Network and USB Connectors

Note: Network and USB connectors are used to connect the desk PDM chargers to a PC running the WinPDM or to the LAN (not for charging).

21.3.3

Rack PDM Charger

The rack PDM charger is used for charging several phones, as well as for software download, and synchronization of parameters. The built in power supply can charge up to six cordless phones at once.

21.3.4

Battery Pack Rack Charger

The battery pack rack charger is used for charging up to six spare batteries.

121

1424-EN/LZT 103 088 Uen D3 2010-11-16

Page 121
Image 121
Aastra Telecom DT690 manual Rack PDM Charger, Battery Pack Rack Charger