CORDLESS PHONE FOR
15.1.2 | Writing and Sending a Message |
To write and send a message, do the following:
1.Press Menu, select 
, and press Select.
2.Select Write new message, and press Select.
3.Write the message and press Send.
Note: The maximum message length is 160 characters (Keys
#can be used. Keys 0 and 1 contains special characters.) See figure 14 on page 58 to see all characters. Some characters require 2 bytes in the final message, which means that the total number of characters can be less than 160.
4.Dial a number, or press the middle soft key, to enter the contact list.
5.Press Send to send the message.
The first character entered will be an upper level character followed by
lower level characters unless the is pressed before entering the character.
When you press a key, the first available character on that specific key is displayed. To get any of the other characters on that key, press the key until that character appears in the display. For example, to enter the character E, press twice on the key 3. E appears in the display and is selected after a time out or when another key is pressed.
Note: To delete a character, press Clear.
15.1.2.1 | Opening a Sent Message |
To open a sent message, do the following:
1.Press Menu, select 
, and press Select.
2.Select Sent, and press Select.
3.Select a message, and press View.
15.1.3 | Forwarding a Message |
You can forward both received and sent messages to other destinations.
To forward a message to another phone number, do the following:
1.Press Menu, select 
, and press Select.
2.Select Inbox to forward a received message and press Select.
Or
89 |
|
