EtherHub 1500 System User’s Guide
Rear Panel Displays
This section describes significant features of the unit’s rear panel. See Figures 2.6 and 2.7 for illustration.
|
| POWER | POWER |
| Alternative Port | SOCKET | SWITCH |
Connectors |
| ||
|
|
| |
| ALT PORT |
|
|
|
|
| ON |
FlexBus 1500 | This device complies with Part 15 of the FCC |
|
|
| Operation is subject to the following two |
|
|
| (1) This device may not cause harmful |
|
|
(2) This device must accept any interference
including interference that may cause
IN OUT
OFF
50
Figure 2.6 The EtherHub-16i+ Rear Panel
| Connectors | POWER | POWER |
| Alternative Port | SWITCH | |
|
| SOCKET | |
|
| ALT PORT | ON |
|
|
| |
FlexBus 1500 |
| SERIAL PORT |
|
| This device complies with Part 15 of the FCC |
| |
|
| Operation is subject to the following two |
|
|
| (1) This device may not cause harmful |
|
(2) This device must accept any interference
including interference that may cause
IN OUT
OFF
47
Figure 2.7 The EtherHub-16mi+ Rear Panel
Port Connections
FlexBus 1500™
The unit has two FlexBus 1500™ connectors labeled BUS IN and BUS OUT for connecting the hub to a compatible hub or a network management agent. The FlexBus 1500 cable that comes with this package is used specifically for these ports. Only hubs cascaded through the BUS IN and BUS OUT connection can be managed by a network management agent.
Hardware Description |
