EtherHub 1500 System User’s Guide

A 16-port intelligent hub with an SNMP-based network management agent. It is a component of Accton’s EtherHub 1500 System.

Ethernet

A network communication system developed and standardized by DEC, Intel, and Xerox, using baseband transmission, CSMA/CD access, logical bus topology, and coaxial cable. The successor IEEE

802.3standard provides for integration into the OSI model and extends the physical layer and media with repeaters and implementations that operate on fiber optics, broadband, and unshielded twisted-pair.

FlexBus 1500 Ports

STP ports found at the backplane of the EtherHub labeled BUS IN and BUS OUT. These ports are used for linking the hub to other compatible hubs using Accton’s FlexBus 1500 STP cable.

Jabber

Refers to an abnormal Ethernet frame transmission. The frames causing jabber are normally much too long. It may come from a malfunctioning Ethernet card and may cause data loss for all network users.

LED

Light emitting diode on the front panel of the EtherHub used for monitoring a hub or network condition. A LED display corresponds to a hub condition.

MIB

An acronym for Management Information Base. It is a set of database objects that contains information about the device. Note that MIB II and Bridge MIB are simply subordinate components of the overall MIB.

Multi-Segment Architecture

2

Glossary

Page 92
Image 92
Accton Technology 1500 manual Led