Accton Technology manual EtherHub 1500 Site

EtherHub 1500 System User’s Guide

Remote Out-of-Band Configuration

If you use a remote PC to configure the EtherHub 1500 via modem connections, at the remote site make sure the modem’s baud rate is 9600 and that the AT command is supported.

EtherHub 1500 Site

Connect the DB9 to RJ45 converter for the EtherHub-16mi’s serial port (RS232), and a DB25 to RJ45 converter for the modem’s serial port (RS232) using the UTP cable provided. You do not have to set the modem, because the EtherHub-16mi+will automatically configure it to auto-answer mode.

ΦThe DB9 to RJ-45 and DB25 to RJ-45 converter connectors come with this package.

ΦMake sure the modem’s baud rate is set to 9600.

Modem

FLEX -BUS 1500	ALT PORT
	SERIAL PORT
OUT IN	9-PIN

to hub

to modem

black color

gray color

Figure 3.4 Connecting the Hub’s RS232 Serial Port to a Modem

Remote Site

At the PC site, connect the PC’s COM port (COM1, COM2, COM3 or COM4) to the modem’s serial port (RS232) using the UTP cable.

3-8 Hardware Installation