EtherHub 1500 System User’s Guide
In-Band Configuration
If you use AccView/Open or other network management software to configure the EtherHub 1500, then set up your in- band Network Management Station.
The in-band network management station is the personal computer used to run your network management software. It should be connected to any available RJ-45 port of the stacked system and on the same segment as the SNMP management agent.
Accton’s EtherHub 1500 System has Windows-based network management software called AccView/Open. Any PC running the AccView/Open program can serve as your in-band network management station. Inquire with your Accton dealer on how to acquire this package. Also note that the AccView/Open EtherHub Manager can be integrated into third-party management platforms as described in Chapter 1.
ΦAfter hardware installation, you can also configure the hub using the Configure button. For the EtherHub-16mi +, we recommend using Accton’s in-band network management software (AccView/Open) or the out-of-band program. Proceed to Chapter 4 for details.
Installing an SNMP Backup Agent
If you are performing first time installation, just connect two Agents and let the system automatically choose the Master agent and the Slave agent.
If you are adding a slave agent to an existing system, peform the following steps:
1.Before connecting to the system, set the target SNMP agent to Slave mode using the Configure button. Be sure the PWR/CPU LED is ON (i.e., blinking).
3-10 | Hardware Installation |
