Accton Technology 1500 manual Stacking Hubs without a Rack

EtherHub 1500 System User’s Guide

Stacking Hubs without a Rack

1.Stick a self-adhesive rubber foot (comes with this package) on the 4 hollow spaces at the bottom of the first hub.

2.Place the first hub in the area where you want the stack to be installed.

3.Repeat step 1 for each hub before stacking them. The rubber feet cushion the hubs against shock/vibration and provide space between each hub for ventilation.

EtherHub1500 Hub Stack (Up to 10 Hubs)

Figure 3.1 Stacking Hubs without a Rack

ΦThe two mounting brackets and screws on the sides of the hub need not be removed if you do not mount the hub in a rack. Keep the mounting brackets and screws, however, for possible future use.

Hardware Installation 3-3