EtherHub 1500 System User’s Guide
Linking Distributed Segments
Hubs installed at various sites can be managed by a single EtherHub 1500 Agent when they are connected to the Agent via the FlexBus 1500 port connection. However, all hubs must be connected to the same segment at the central site. The segment setting for hubs at all other sites must be set to isolated. (Refer to the Segment Setting function in Chapter 4.) Hubs within the remote stacks can remain isolated or be connected to hubs within the same location using the STP
Distributed Multi-Segment Environment
Central Site
EtherHub1500 AGENT
Segment 1
EtherHub1500 HUB
Segment 1
EtherHub1500 HUB
Segment 1
EtherHub1500 HUB
Segment 1
| EtherHub1500 HUB |
| Segment 1 |
ACCVIEW |
|
AccView Station | Remote Site #2 |
| |
| EtherHub1500 HUB |
| Segment y |
| EtherHub1500 HUB |
| Segment y |
EtherHub1500 HUB
Segment y
Connected by
Coax Cable
~
~
~
~
FlexBus1500
Remote Site #1
EtherHub1500
Segment x
EtherHub1500
Segment x
Cascaded by
STP Cable
Up to 100m, managed by a single SNMP agent
Figure 5.9 Linking Distributed Multi-Segments
Applications |
