Accton Technology 1500 manual Using the Configure Button

EtherHub 1500 System User’s Guide

Using the Configure Button

Depending on the model you purchased, there are 5 (EtherHub- 16i+) or 6 (EtherHub-16mi+) configuration functions accessed in sequence using the Configure button, including:

∙Segment Setting

∙Hub ID Setting

∙Master Agent Setting (EtherHub-16mi+only)

∙Demo Function

∙Diagnostic Function

∙Reset Function.

A "long press" on the button allows you to switch from one function to the next. While a "short press" switches between selections within each function. LED indicators light up to indicate which configuration function the system is in.

ΦTo avoid unauthorized configuration changes, you may disable the Configure button via the out-of-band configuration program or via the AccView in-band network management program.

Before using the Configure button, remember that:

∙A "long press" means pressing the Configure button for more than 2 seconds and then releasing the button. While a "short press" means pressing the Configure button and immediately releasing it.

∙A "long press" has 2 functions. (1) It works like an [Enter] key ⎯ implementing the last selection displayed by the LED

indicators for the current function. (2) It brings the system to the next configuration function.

4-16 Setup and Configuration