Acroprint ES1000 user manual Selecting the Print Format, Hours AM/PM

Selecting the Print Format

You will not be allowed to change minute print format while in a current pay period. Error message E-49 will be displayed. You may change a current minute print format after you reset all time cards. Please refer to "Card Resetting" section of this manual.

Push the [SETTING START/END] button before you start setting. At that moment,

" " is indicated on a display and you go into setting mode.

Example Change the print format of the hour to "AM/PM" and the minute to "1/100" min.

[HOURS]
1	AM/PM
2	24Hour	PRINT

FORMAT

1 Push the [FUNCTION] button for 2 seconds.

FUNCTION SET

[MINUTES] 1 Regular

2 Hundredths

PRINT

FORMAT

FUNCTION SET

PRINT

FORMAT

FUNCTION SET

Date

AM

Colon

2 Once a number on the display starts flashing, position the " " mark under the "PRINT FORMAT" mark by pressing [FUNCTION] button.

A flashing number can be changed.

3 In case of the example, push the [+] or [-] button to set the left-side number at "1" to select "AM/PM" format and then push the [SET] button. At that moment, flashing of the display will change to the right- side number.

4 Push the [+] or [-] button to set the desired minute type. In case of the 1/100 min., set the right-side number of the display at "2".

Even if you select "2", only calculation result is printed in the

hundredths (1/100) min. IN and OUT punches are always printed in regular (1/60) min.

5 Push the [SET] button to finish the
setting. At that moment, the display
will change from flashing to steady,
and the setting is now completed.
6 Push the [SETTING START/END]
button to get out of setting mode.
Make sure "date" and "time" are
indicated on the display and the
colon is flashing. Then replace the
cover and lock.	21