4. Settings
Preparation for Setting
Caution: If time cards were punched prior to original settings or if you wish to change Pay Periods or when the Day Advances or change the Minute print format you will need to reset ALL Time Cards. Please refer to the ALL Cards Resetting section under Additional Features.
Removing and replacing front cover.
Make sure the power is on before making setting.
1 Unlock the cover.
Hold the sides of the cover with both hands and pull it toward you.
Key
Front Cover
2 Once you push the [SETTING START/END] button, display will be as shown in the following figure. Then, push the control button for two seconds and you can go into the setting mode.
SETTING START/END button 
Display
Function buttons
3 Make settings using the control button while watching the display.
Please refer to the following pages for the details of each setting.
Tabs
4 After setting has been completed, fit the tabs at the lower sides of the cover into the holes of the unit. Then, fit another set of tabs at the top sides of the cover into the holes of the unit.
Holes
Holes
11
