Setting the Schedule
Program | Description |
| Free Zone | Time Zone |
No. |
| Rule* | Rule | |
|
| |||
01 | Calculation Rule |
| 1 | 2 |
02 | Start Time for Irregular Printing (Black | Red) |
| Yes |
03 | End Time for Irregular Printing (Red | Black) |
| Yes |
04 | Limit of Regular Hours per Day |
|
| Yes |
05 | Limit of Regular Hours per Week |
|
| Yes |
06 | Duration of Round Time (Start & End Shift Times) |
| Yes | |
07 | Duration of Grace Time (Start & End Shift Times) |
| Yes | |
08 | Red Printing for Grace Time Period |
| Yes | |
09 | Rules for Working Days Outside Regular Schedule |
| Yes | |
10 | Start Time of Break #1 |
|
| Yes |
11 | Duration in Minutes, Break #1 |
|
| Yes |
12 | Start Time of Break #2 |
|
| Yes |
13 | Duration in Minutes, Break #2 |
|
| Yes |
14 | Start Time of Break #3 |
|
| Yes |
15 | Duration in Minutes, Break #3 |
|
| Yes |
16 | Threshold Hours for Auto Break Deduction | Yes | Yes | |
17 | Duration of Break Time |
| Yes | Yes |
18 | Threshold Hours for Overtime Calculation | Yes |
| |
19 | Limit Hours for OUT punch |
| Yes |
|
*Free Zone Rule Recommended
Selecting Free Zone calculations (#1) under Program 1, you will have access only to program numbers 16, 17, 18, and 19. (See chart above.)
Free Zone or Open Shift (easy and most popular)
You can regulate the worked hours of the day by setting the "Limit hours for OUT punch".
16 Threshold hours for
17 Duration of break time
auto break deduction Break time | Worked more than 4 hours | |
IN | (= 30 min.) | OUT |
Regular worked hours ( = 4 hours)
| Regular | Overtime | Worked more | |
worked hours | ||||
(= 1hour) | than 6 hours | |||
| ( = 2 hours) |
| ||
18Threshold hours for overtime calculation (= 6 hours)
19 Limit hours for OUT punch (= 18 hours)
Note: Numbers in square mean program number.
Push the [SETTING START/END] button before you start setting. At that moment,
"
" is indicated on a display and you go into setting mode. Set the " 01 Calculation rule".
Program No.
FUNCTION
26
1
Free Zone
2
Time Zone
SCHEDULE
SET
1 Push the [FUNCTION] button for 2 seconds.
2 Once a number on the display starts flashing, position the "
" mark next to the "SCHEDULE" mark by pressing the [FUNCTION] button.
A flashing number can be changed.
