Wall Mounting the ES1000
The ES1000 may be platform or wall mounted using the wall mount screws supplied. To mount unit on wall, take the following steps:
1 Install wall mount screws (supplied) into a wall 3.94 inches (10 cm) apart. Be sure to keep about 0.12 inch ( 3 mm) of the screw head out of the wall. You can use a supplied template to fix position of two screws.
The supplied screws are intended for use on a thick wooden wall or wooden column. Do not use them on any other materials. There is a danger that the unit may come off if used on other materials.
3.94" | (10cm) |
|
0. 
12"(3mm)
Screws
Wall
Wall Mount Template
2 Mount the wall mount
brackets as shown on the
right.
Where to Install the ES1000
Avoid placing the unit in environments that are:
•humid or dusty
•exposed to direct sunshine
•subject to frequent or continuous vibrations
•outside the temperature range between
• affected by chemicals or ozone | 5 |
