ADC AD-26, WDA-540, AD-295, AD-540 user manual Program Location 14 PL14, Maximum Time for Auto Dry

Q. PROGRAM LOCATION 14 (PL14)

Maximum Time for Auto Dry

Refer to Section V for instructions on entering program locations.

Time Decrease

LO Temp

("Hold In" to Accelerate)

Proceed to next location

to be changed

PL14

Perm Press

Adrt

(Wait 3-Seconds)

25

Perm Press

PL15

Location to be viewed/changed.

Press “Perm Press” key.

Display will read “Adrt,” automatic maximum drying time for 3-seconds and then time programmed. If no change, press “Perm Press” key, otherwise press “HI” or “LO” keys and then “Perm Press” key.

Time Increase

HI Temp

("Hold In" to Accelerate)

To exit program mode, open program switch

Summary: The maximum auto dryness time is programmable from 1 to 99 minutes.

48