ADC AD-26, WDA-540, AD-295, AD-540 user manual Single Coin only

A. SINGLE COIN ONLY

For ALL dryer models except AD-26/AD-295 and AD-540/WDA-540. (For Single Coin models AD-26/AD-295 and AD-540/WDA-540refer to page 54).

PL01 -	°FAr	- Temperatures in Fahrenheit
	tInE	- Timed mode
	Grd	- Anti-wrinkle guard on
	bUZ	- Anti-wrinkle guard buzzer (tone) on
	Coin	- Coin(s) required to start
	FLS	- Display will flash in intervals between “FILL” and “Amount To Start”
	bCrS	- Bad coin reset
	AtIn	- Accumulative time
PL02 -	nSEn	- Rotational sensor not selected
	PdrY	- Percent Dry - 97%
PL03 -	HI°F	- 180°
PL04 -	HICd	- Temperature - 100°, Time - 2 minutes
PL05 -	LO°F	- 120°
PL06 -	LOCd	- Temperature - 100°, Time - 2 minutes
PL07 -	PPOF	- 150°
PL08 -	PPCd	- Temperature - 100°, Time - 3 minutes
PL09 -	LCdE	- Left coin denomination - 25¢
PL10 -	rCdE	- Right coin denomination - 25¢
PL11 -	tFAS	- Time for amount to start -10 minutes
PL12 -	AtSt	- Amount to Start - 25¢
PL13 -	AFAt	- Amount for additional time - 25¢
PL14 -	Adrt	- Automatic dry maximum time - 30 minutes
PL15 -	GdLY	- Anti-wrinkle guard off delay time - 2 minutes
PL16 -	Gont	- Anti -wrinkle guard on time - 20-seconds
	AGt	- Active anti-wrinkle guard time - 10 minutes
PL17 -	A and b	- “A” is adjustable from 1 to 99 (example: A = 5)
	Factors	- “b” is adjustable from 1 to 99 (example: B = 75)

52