ADTRAN 1200130L2, 1200130L1 user manual This field shows the number of pings sent always

Chapter 11. Diagnostics

Start Ping

Results are shown once you start the ping. The Start Ping command causes the FSU to send ten ping requests to the target station. At the end of the ten-ping test, the following results are shown:

Pings Sent

This field shows the number of pings sent (always 10).

Responses

This field shows the number of responses received from the pinged device.

Min Time

This field shows the shortest round-trip delay of the received responses. Round-trip delay is counted from the time the ping is sent until the response is received.

Max Time

This field shows the longest round-trip delay of the received responses. If a response is not received before the unit times out, the delay is not calculated in.

Avg Time

This field shows the average response time based on all received responses.

61200.130L1-1 FSU User Manual 103