Chapter 5. Configuration Overview

Chapter 5

Configuration Overview

LOCAL AND REMOTE CONFIGURATION

The FSU can be configured locally or, when using the VT 100 interface, communications can be established so a local FSU can configure a remote FSU. See the chapter Operation for informa- tion on selecting Local or Remote operation.

The Configuration menu (Figure 5-1) consists of submenus relating to specific interfaces or functions of the FSU requiring setup:

DTE Port 1

DTE Port 2

Network Port

Control (front panel only)

IP Routing

System Configuration

Configure the Network Port before the DTE Ports. Selections made will affect the choices available for the DTE ports.

When configuring DTE port 1 or 2, select the Protocol first. This selection determines which parameters will be available for the Physical Layer Options, Protocol Options, and Protocol Address Table.

61200.130L1-1

FSU User Manual

33

Page 47
Image 47
ADTRAN 1200130L2, 1200130L1 user manual Chapter, Local and Remote Configuration