Chapter 3. Operation
Front Panel Operation
To choose a menu item, press the corresponding number or alpha character on the keypad. Press Shift to activate menu items with alpha selections. Scrolling to the selection by press- ing either the Up or Down Arrow also activates the menu items. The flashing cursor indicates which selection is activated. Press Enter to select the item. The following steps and Figure
1.Activate Configuration (CONFIG) using the arrow keys or by pressing 1. The cursor will flash on the number next to the activated selection. Press Enter.
2.Use the arrow keys to view submenu items.
3.Choose an item on the submenu such as DTE PORT 1.
4.Activate DTE PORT 1 using the arrow keys or by pressing 1. Press Enter.
5.Activate PROTOCOL options using the arrow keys or by pressing 1. Press Enter.
6.Press the arrow keys until the desired protocol is displayed. Press Enter.
|
|
|
|
|
| 1 | PORT DISABLED |
|
|
|
|
|
| 2 | FRAME RELAY |
|
|
|
|
|
| 3 | SDLC <> LLC2 |
|
|
|
|
|
| 4 | TRANSPARENT BOP |
|
|
|
|
|
| 5 BISYNC | |
| 1 DTE PORT 1 |
| 1 PROTOCOL |
| 6 | TRANSPARENT ASYNC | |
1 CONFIG | 2 DTE PORT 2 |
| 2 PHYS LYR OPT |
| 7 PPP SYNCHRONOUS | ||
| 3 NETWORK PORT |
| 3 PROTOCOL OPT |
| 8 | PPP ASYNC | |
| 4 | CONTROL PORT |
| 4 ADDRESS TABLE |
| 9 | SLIP |
| 5 | IP ROUTING |
|
|
|
|
|
| 6 | UNIT CONFIG |
|
|
|
|
|
Figure
Example of Basic Menu Travel
16 | FSU User Manual |
