80 FSU User Manual 61200.130L1-1
Chapter 8. IP Routing
Example Route Table Entry
IP Address=192.239.232.0
Destination Port=Network Port
Destination DLCI=16
This example provides a route for IP address range 192.239.232.1
through 192.239.232.254 using the network port and virtual
circuit 16. See the following parameter descriptions.
IP Address (IP ADDR)
Enter the IP address to be routed. This entry identifies an
individual host or an entire subnet. To address an entire subnet,
enter a value with the host portion equal to 0.
Destination Port (DST PORT)
Select the port on the FSU used to transmit the packets with the
specified IP address.
Destination DLCI (DST DLCI)
Enter the virtual circuit to be used when the network port is part
of the destination IP path. This selection is only applicable if the
corresponding destination port element is set for Network port.
Edit Next Entry (NEXT Key on Front Panel)
Edit the next entry in the address table.
Edit Previous Entry (PREV Key on Front Panel)
Edit the previous entry in the address table.
Delete This Entry (DEL Key on Front Panel)
Delete the current entry in the address table.
Add New Entry (ADD Key on Front Panel)
Add a new entry to the address table.