ADTRAN 1200130L1, 1200130L2 Transparent BOP (TRANS BOP)

61200.130L1-1 FSU User Manual 51
Chapter 6. DTE Port Configuration
Transparent BOP (TRANS BOP)
Transparent BOP is a synchronous mode which can accept any
HDLC-like protocol as input. This setting allows the FSU to
connect to devices even if the FSU does not understand their
protocol's addressing and controlling techniques. The FSU
becomes transparent to the data link layer protocol and provides
end-to-end connectivity between two HDLC-like devices. See
Figure 6-6 for the Transparent BOP menu tree.
1 PROTOCOL 4 TRANSPARENT BOP
1 DTE PORT 1 2 PHYSICAL LAYER OPTIONS 1 INTERFACE TYPE 1 RS232
2 V.35
1 CONFIG 1 2400 bps
2 DTE PORT 2 2 4800 bps
3 9600 bps
4 19.2 Kbps
5 38.4 Kbps
6 56 Kbps
2 SYNCHRONOUS BIT RATE 7 64 Kbps
8 112 Kbps
9 128 Kbps
10 168 Kbps
11 192 Kbps
12 224 Kbps
13 256 Kbps
14 280 Kbps
15 320Kbps
16 384 Kbps
17 498 Kbps
18 512 Kbps
3 SYNCHRONOUS IDLE METHOD 1 TRANSMIT FLAGS
2 TRANSMIT ALL ONES
4 HARDWARE FLOW CONTROL 1 OFF
2 ON
3 PROTOCOL OPTIONS N/A
4 PROTOCOL ADDRESS TABLE 1 FAR END PORT NUMBER 1 DTE PORT 1
2 OUTGOING DLCI 2 DTE PORT 2
Figure 6-6
Transparent BOP Menu Tree