Chapter 3. Operation
FSU MENU STRUCTURE
The opening menu is the access point to all other operations. The Main menu branches are Configuration, Statistics, Diagnos- tics, Save, Abort, and Logout. See Figure
The Logout selection is available on the VT 100 interface only.
In this chapter, the VT 100 selections are listed first followed by the
Front Panel selections (if the names differ).
Main Menu
Definitions for the branches of the Main menu follow:
Configuration (CONFIG)
Configuration is used to select network and DTE operating parameters. For more information on configuration options, see the following chapters: Configuration Overview, DTE Port Con- figuration, Configuring the Network Port, Configuring IP Routing, and System Configuration. When DTE Port 1 or 2 is selected, the PROTOCOL enabled determines the selections for PHYSICAL LAYER OPTIONS, PROTOCOL OPTIONS, and PROTOCOL ADDRESS TABLE.
View Statistics (STATS)
This selection displays statistical information for DTE ports, the network port, the protocol, and the system. See the chapter Statistics for more information.
Diagnostics (DIAG)
Diagnostic options enable and disable loopback and ping functions. See the chapter Diagnostics for more information.
FSU User Manual | 19 |
