ADTRAN 1200130L1, 1200130L2 user manual LLC2 Ssap LLC Ssap

Chapter 6. DTE Port Configuration

LLC2 SSAP (LLC SSAP)

Defines a point-to-point connection on the network. For an SDLC connection, the SSAP of one FSU should match the DSAP on the other FSU. The value of this parameter must be in increments of four beginning with 04.

LLC2 DSAP (LLC DSAP)

Defines a point-to-point connection on the network. For an SDLC connection, the DSAP of one FSU should match the SSAP on the other FSU. The value of this parameter must be in increments of four beginning with 04. See the section SNA/SDLC with Local Spoofing in the chapter Applications for a configuration example which demonstrates the SSAP and DSAP arrangement.

Outgoing DLCI (OUT DLCI)

Enter the DLCI address that identifies the virtual circuit used to make the SDLC connection.

Edit Next Entry (NEXT on front panel)

Edit the next entry in the address table.

Edit Previous Entry (PREV on front panel)

Edit the previous entry in the address table.

Delete This Entry (DEL on front panel)

Delete the current entry in the address table.

Add New Entry (ADD on front panel)

Add a new entry to the address table.

50 FSU User Manual 61200.130L1-1