34 FSU User Manual 61200.130L1-1
Chapter 5. Configuration Overview
The FSU contains a default set of configuration options stored in
read-only memory (see the appendix Default Configuration
Profile). The unit is shipped from the factory with this profile
loaded into the current (nonvolatile configuration) memory. If
this profile matches requirements for the system, then no
additional configuration is required to put the unit into service.
If the profile does not match system requirements, it can be
modified. When the profile is modified, it is stored in the
current (nonvolatile configuration) memory. The FSU is then
configured with that profile every time power is turned on.
For detailed information on configuration see the chapters DTE
Port Configuration, Network Port Configuration, IP Routing, and
System Configuration.
Configuration menus are shown in Figures 5-2 (for the Front
Panel) and 5-3 (for the VT 100 terminal).
Figure 5-1
VT 100 Configuration Menu