Amana RS3100007 Washer Dimensions, Location, Risers, Drain, Low Standpipe Installation

Risers

Risers or air cushions may be installed if pipes knock or pound when flow of water stops. Risers are more efficient when installed as close as possible to water supply faucets.

Risers

(air cushions)

Water supply faucets

Drain

Drain receptacle must be able to handle hose with at least 1¼" (32cm) outside diameter. End of drain hose must be 36" (91.44 cm) above floor, or water may run out of washer before end of cycle.

Low Standpipe Installation

For standpipe installation below 36" (91.44 cm), install Siphon Break Kit (part #562P3).

Before You Install

Washer Dimensions

LID

OPEN 90°

53.5"

137.1 cm

28" (71.1 cm)

2"

5.1 cm

Location

Install washer on a solid floor.

Wood floor constructions may sometimes need to be reinforced to minimize vibration from unbalanced loads. Carpet and soft tile surfaces also contribute to vibration and/or tendency for washer to move slightly during spin cycle.

Never install washer on a platform or weak support structure.

DO NOT install washer on carpeted floor.

Use dimensions shown at right to determine space needed for easy installation and servicing.

	43.6" (110.7 cm)
36.6" (93 cm)

26.9" (68.3 cm)

RS3100007 Rev. 0 C–6