Appendix, General Changes | American Power Conversion PD80KL6FK1-M

Appendix

Changes in This Manual

Overview

The following list references the specific changes made to this manual since its last release (990-1468B).

General Changes

Updated manual to reflect the InfraStruXure PDU’s network management capabilities.

Changes by page number

Page 11	Added section detailing the user connection plate.
Page 20	Updated instructions for connecting contacts to the PDU monitoring unit.
Pages 43–54	Added instructions for the PDU communication configuration.
Pages 60–61	Updated instructions for testing the Emergency Power Off switch.
Pages 63–63	Added instructions for connecting input contacts and relay outputs to the user connection
	plate.
Page 65	Added instructions for downloading firmware updates.
Page 68	Added relay output specifications.
Page 74	Updated instructions for obtaining service from APC.

InfraStruXure PDU—Operation and Maintenance

75

Image 83

American Power Conversion PD80KL6FK1-M manual Appendix, Changes in This Manual, General Changes, Changes by page number

Contents

80kW InfraStruXure PDU Page Companion manuals How to find updates to this manualAbout This Manual AudiencePage Contents System Operation Specifications Product Information Overview SafetySafety symbols used in this manual Cross-reference symbols used in this manual Maintenance performed while the PDU is receiving input power Installation/Maintenance Emergency Power Off EPO Total Power Off EMI InfraStruXure PDU Components Overview PDU front view exterior Front view interior Front view door open  Wraparound Maintenance bypass Panel- Rear view interior PDU monitoring unit   User connection platePage        PDU Display Interface Navigating through screens Top-level status screensTop-level menu screen Password-protected screens Load-Meter Screen Power Factor Volt-Meter Screen Open or Closed Contacts ScreenOverview Input Contacts PDU Display Interface How to connect contacts to the PDU monitoring unit Cross Tie Breakers ScreenMain Input Bypass Input Clear Log Alarms ScreenNew Logged Items Entire Log Voltage Limits Alarm SetupAlarm Beeper Loading Limits Alarm Condition Explanation Message When Condition Cleared PDU Alarms Branch Ckt Limits Panel ScreenBranch Ckt Loading Distribution panel Panel Configuration Global Panel Config Date/Time Config ScreenSystem Password System/Network Output Config Electrical ConfigInput Config System ID Factory DefaultsFirmware Updates Manufacturer Data System Operation How to Transfer the UPS into Maintenance Bypass Operation System Operation System Operation How to Return from Maintenance Bypass Operation Confirm Yes, UPS Load on No, Abort Confirm Yes, UPS into Bypass No, Abort Set the UPS System Enable switch to the OFF position How to Ensure Total Power Off System Operation How to Apply Power to the System PowerView RM Rev 000 English Please wait Top-Level Status Screen System Operation Network management interfaces Communication ConfigurationInfraStruXure PDU Management Options InfraStruXure Manager Connect the InfraStruXure PDU to the InfraStruXure Manager Configuring the InfraStruXure Manager Connect the InfraStruXure PDU to your network Configuring the Network Management InterfaceConfiguration Overview Device IP Configuration Wizard TCP/IP configuration methods Bootp & Dhcp configuration Option 43 = 01 04 31 41 50 43 where Remote access to the control console Local access to the control consoleUse apc for the User Name and Password Choose Network from the Control Console menu Use apc for both User Name and PasswordControl console Web interface Snmp FTP and SCP 80kW InfraStruXure PDU-Operation and Configuration Customizing and Updating the PDU Important Safety Instructions Circuit Breakers Power CablesPDU Orderable Part List 30A, 3-wire power cables Add a circuit breaker on the PDU How to Add Circuit Breakers and Power CablesAdd a power cable to the PDU or RDP Customizing and Updating the PDU Testing the EPO wiring and switches How to Test the EPO Switch Safety warnings Customizing and Updating the PDU ATS 0 ATS 1 ATS Atsen How to connect contacts to the PDU monitoring unit Upgrading the PDU monitor processor How to Download Firmware UpgradesDownloading firmware upgrades from a local computer Xmodem 80kW InfraStruXure PDU Specifications PD80F6FK1-M PD80G6FK1-M PD80L6FK1-M PD80F6FK1-M PD80G6FK1-M PD80L6FK1-M Page Product Information InfraStruXure Standard Warranty Product Information Life-Support Policy APC Three-Phase Systems How to contact APC How to Obtain Service Changes by page number AppendixChanges in This Manual General ChangesPage Index 80kW InfraStruXure PDU-Operation and Configuration UPS Page Page Page Page APC Worldwide Customer Support