78 80kW InfraStruXure PDU—Operation and Configuration
FFactory defaults, resetting the,30
Firmware updates, how to
download,65
Front view
door open,8
exterior,6
interior,7
FTP access to the PDU,53
Fuses,7
GGlobal Panel Config,27
Ground bar, location of,59
Ground lugs,7
Ground wire, location of,59
IInfraStruXure Manager
as a PDU management option,43
configuration,44
connect the InfraStruXure PDU to
the,44
InfraStruXure Standard Warranty,71
Input cables, for UPS,8
Input contacts
connecting,63–64
connection location,11
information about,18
Input power, maintenance performed
while the PDU is receiving,2
Input transformer,9
Installation warnings,2
KKeys, for navigation,13
LLCD,13
LEDs
EPO specific,60
on display interface,13
on monitoring unit,10
Leveling feet,6
Life-support policy,73
Load meter screen,16
Load on LED,13
Load test ports,9
Local access to the control console,49
Lock-out bracket,6
MMain input switch,7
Maintenance bypass operation
returning from,34–36
UPS, transferring into,31–33
Maintenance bypass panel,8
Maintenance performed while the
PDU is receiving input power,2
Maintenance warnings,2
Management options,43–54
InfraStruXure Manager,43
Network management
interfaces,43
Manufacturer data,30
MCCB subfeed circuit breaker,7
Monitoring unit
circuit breakers,7
connecting contacts to,20, 64
detailed description,10
location,9
NNavigation
keys,13
through screens,14
NetShelter VX enclosure,5
Network address configuration,28
Network management interface
accessing on a configured PDU,51
configuration,45–54
recovering from a lost
password,54
Network port, on monitoring unit,10
Neutral bar, location of,59
Neutral wire, location of,59
OOperation,31–42
maintenance bypass, returning
from,34–36
maintenance bypass, transferring
the UPS into,31–33
system, applying power to,39–42
total power off, ensuring,37–38
Orderable part list,56
Output cables, for UPS,8
PPanel Configuration,26
Panel screen,25–27
Part List,56
Password
configure,28
protected-screens,15
recovering from a lost,54
Performance specifications,67
Ports
branch current monitor,10
load test,9
Power cables
adding to the PDU,58–59
bottom-feed access,7–8
location,6
sub-feed,6
UPS input and output,8
RRack distribution panel,5
Rear view, interior,9
Relay outputs
connecting,63–64
connection location,11
information about,18
specifications,68
Remote access to the control
console,49
Reset button, on monitoring unit,10
Rocker switch, arm/test,60
SSafety,1–4
symbols used in this manual,1
warnings,2–4
SCP access to the PDU,53
Screens. See display interface or
individual screen name.
Service, obtaining,74
Shielding troughs,6
SNMP access to the PDU,52