Chapter 4BIOS Setup Description
DMA Mode | Auto | Set to AUTO to let the BIOS auto detect the supported DMA |
| SWDMA0, 1, 2 | mode. |
| MWDMA0, 1, 2 | SWDMA = Single Word DMA |
| UDMA0, 1, 2, 3, 4, 5, | |
|
| |
| 6 | MWDMA = Multi Word DMA |
|
| UDMA = Ultra DMA |
|
|
|
S.M.A.R.T | Auto | Set to AUTO to let the BIOS auto detect hard disk drive |
| Disabled | support. |
| Enabled | Set to Disabled to prevent the BIOS from using SMART |
|
| feature. |
|
| Set to Enabled to allow the BIOS to use SMART feature on |
|
| supported hard disk drives. |
|
|
|
32Bit Data | Disabled | Enable/Disable |
Transfer | Enabled | drives. |
|
|
|
ARMD | Auto | ARMD is a device that uses removable media, such as the |
Emulation | Floppy | LS120, MO |
Type | Hard disk drive | want to boot from media on ARMD, it is required that you |
|
| emulate boot up from a floppy or hard disk drive. This is |
|
| essentially necessary when trying to boot to DOS. You can |
|
| select the type of emulation used if you are booting such a |
|
| device. |
|
|
|
COM 830 | Reference Manual | 69 |
