APC AP9608, AP9208 manual Sleeping Inverter Shutdown

The Status line at the bottom of the Status screen can display the follow- ing UPS status conditions:

•	Runtime Calibration	•	In Bypass
•	Waiting to Power Load	•	Sleeping – Delayed Wakeup
•	Smart Boost	•	Sleeping – Inverter Shutdown
•	Smart Trim	•	Forcing Graceful Shutdown
•	On-Line	•	Sleeping – Low Battery
•	On-Battery	•	Shutdown Overload – Unable
•	Low Battery		to Transfer to Battery
•	Replace Battery	•	UPS Fault

The following fault conditions display only when Call-UPSII is used with a Matrix-UPSand a fault condition exists.

•	Main Relay	•	Iso Unit Fan
•	Batt Charger	•	Bypass Supply
•	Bypass Relay	•	Voltage Select
•	Internal Temp	•	DC Imbalance
•	Elec Unit Fan

If the UPS is powered off during a status request, Call-UPSII responds with the message:

UPS Powered OFF

14