4.8 Measure-UPS Info
Note: The Measure-UPSInfo Main menu item appears only when Call-UPS II is used in conjunction with a Measure-UPSenvironment monitor.
Type 7, then press ENTER at the main menu to display Measure-UPSstatus, settings, and alarms:
------------------- MEASURE-UPS STATUS ------------------
| PROBE 1 | PROBE 2 |
TEMP Celsius): | 26.67 | |
Low Limit: 1- | 18.10 | 5- |
High Limit: 2- | 23.97 | 6- |
HUMIDITY (%RH): | 036.9 | |
Low Limit: 3- | 040.3 | 7- |
High Limit: 4- | 070.0 | 8- |
F/W Rev: 4Gx
------------------ CURRENT ALARMS --------------------
Hi Temp
Lo RH
<ESC>=Main Menu>
The fields on this screen display Measure-UPSreadings for each con- nected probe, settable alarm limits for each probe, and any current alarms. To make changes to the alarm settings, type the number of the menu item (1–8). If you want to change the low humidity limit for the Measure-UPSProbe 1, for example, you can type 3 and press enter. Scroll through the available choices by pressing SPACEBAR. Press ENTER to make the selection and return to the Measure-UPSInfo screen. When you are finished making changes, press ESC to return to the Main menu. The following table describes the status items and lists the choices for the settable alarm limits.
