UPS STATUS (Smart-UPS and Matrix-UPS)

Item

Description

 

 

Utility Line

Utility line input, in volts AC RMS.

 

 

UPS Output

UPS output to the load, in volts AC RMS.

 

 

UPS Load

Connected load as a percentage of the rated capacity of the UPS.

 

 

Run Time

Estimate of the total run time currently available from the

UPS, based on present load and battery, in minutes.

 

 

 

Load Power

Amount of power being drawn by the load, in volt-amps (if

supported by the UPS).

 

 

 

Load Current

Amount of current being drawn by the load, in amps (if

supported by the UPS).

 

 

UPS Temp

Current temperature inside the UPS, in degrees Celsius.

 

 

Freq

Output frequency of the UPS, in hertz.

 

 

 

Reason for the last UPS transfer to battery. Possible results

Last Xfer

are: Test, Low Voltage, Hi Voltage, Rate of Change, and

 

Notch/Spike.

 

 

Voltage

Total voltage of the UPS batteries, in volts DC.

 

 

Capacity

Battery charge as a percentage of capacity.

 

 

Smart Cells

Number o f Smart Cell battery packs connected to the UPS

(only with Matrix-UPS).

 

 

 

Bad Cells

Number of Smart Cells connected to the UPS that have gone

bad (only with Matrix-UPS).

 

 

 

Batt Date

Date of the last battery change.

 

 

 

Results o f the last UPS self-test. Possible results are: OK,

Self Test

None (not available), Unable to Test (invalid results due to

 

overload), and Battery Failed (due to insufficient capacity).

 

 

13

Page 17
Image 17
APC AP9208, AP9608 manual UPS Status Smart-UPS and Matrix-UPS Description