
3Grasp each ink cartridge by its sides and carefully remove the tape from the cartridge’s print head.
You may safely touch the colorful caps or the black plastic, but be careful not to touch any other part.
Make sure you | Note: Open the color and black |
remove the tape | ink cartridges. Set the color |
from both | PhotoGrade cartridge aside, |
cartridges. | still in its protective packaging. |
| Use it for special projects, not |
|
4Slide the ink cartridges down into the carrier, and then press both cartridges into place.
For the printer to work, you must install two ink cartridges.
Color ink cartridge
Black ink cartridge
When you install the color PhotoGrade ink cartridge, it goes into this side of the carrier, (replacing the black ink cartridge.)
Press the cartridge all the way into the carrier.
Press until you hear a snap, and the cartridge fits snugly in the carrier. It should be difficult to remove. If a cartridge feels loose, it is not properly seated.
10Chapter 1