Avaya 16-601443 Administering Stations, Auto Hold, Coverage Path, Enhanced Conference, Features

Avaya Aura Communication Manager Administration

string, SNMP Source IP addresses, and Craft Access Code (PROCPSWD). Administer these three parameters using Page 3 of the change system-parameters ip-options form.

Avaya Aura Communication Manager Feature Administration

Feature	Administration
On-Hook Dialing	Set up Avaya Aura Communication Manager so that the phone
	supports on-hook dialing. Use the System Parameters Features
	form page 10. Use the command Change
	system-parameters features to view the form and make
	the change.
Auto Hold	Set up Avaya Aura Communication Manager to enable Auto
	Hold, so that the phone automatically places an active call on
	hold when the user answers or resumes a call on another call
	appearance. Use the System Parameters Features form, page 6.
Coverage Path	Administer a coverage path for both phone demonstration and
	normal operations. Use the Coverage Path form and give it a
	number, for example, Coverage path 1. If Voice Mail is available,
	this is also where you administer the hunt group or VDN,
	depending on the type of Voice Mail system being used.
Enhanced Conference	Enable enhanced conference display to support the user
Features	experience for conferences. Block Enhanced Conference Display
	on the Class of Restriction (COR) form must be set to No. Use
	the command Change COR, followed by a number, to view the
	form and make the change. a sample of the Class of Restriction
	form.

Administering Stations

This section refers to Avaya Aura Communication Manager administration on the Switch Administration Terminal (SAT) or by Avaya Site Administration. Administer the following items on the Station form, sample screens of which are provided in Figure 3 through Figure 6. Avaya recommends setting the features covered in this section because they optimize the user interface.

Release 1.1 supports the functionality introduced on Avaya Aura Communication Manager Release 5.2 that allows call server administration of the GROUP parameter on a station-by-station basis. As covered in The GROUP System Value on page 65, the GROUP Identifier can be used in conjunction with the 46xxsettings file to allow administration to apply to specific “groups” of telephones. Before Release 1.1, the Group Identifier had to be administered locally on each applicable telephone. As of Release 1.1, the Group Identifier can be administered centrally, and downloaded to each applicable telephone. The GROUP ID parameter is administered on page 3 of the Change Station Form. Once downloaded, the Group Identifier takes effect starting with the next telephone boot-up.

38 Avaya 1600 Series IP Deskphones Administrator Guide