
Server Administration
In Table 6, the 1600 Series IP Telephone sets the system values to the DHCPACK message field values shown.
Table 6: DHCPACK Setting of System Values
System Value | Set to |
|
|
IPADD | The yiaddr field. |
|
|
NETMASK | Option #1 (if received). |
|
|
GIPADD | Option #3 (if received, which might be a list of IP |
| addresses). |
|
|
TLSSRVR | The siaddr field, if that field is |
|
|
HTTPSRVR | The siaddr field, if that field is |
|
|
DNSSRVR | Option #6 (if received, which might be a list of IP |
| addresses). |
DOMAIN | Option #15 (if received). |
|
|
DHCP lease time | Option #51 (if received). |
|
|
DHCP lease renew time | Option #58 (if received). |
|
|
DHCP lease rebind time | Option #59 (if received). |
|
|
The system values L2Q, L2QVLAN, and PHY2VLAN are not set from a name=value pair if those system values were previously set by LLDP. For more information, see Link Layer Discovery Protocol (LLDP).
Windows NT 4.0 DHCP Server
Verifying the Installation of the DHCP Server
Use the following procedure to verify whether the DHCP server is installed.
1.Select Start-->Settings-->Control Panel.
2.
3.Verify that Microsoft DHCP Server is listed as one of the Network Services on the Services tab.
4.If it is listed, continue with the next section. If it is not listed, install the DHCP server.
48 Avaya 1600 Series IP Deskphones Administrator Guide