Administering Telephone Options
Table 10: LLDPDU Transmitted by the 1600 Series IP Telephones (continued)
Category | TLV Name (Type) | TLV Info String (Value) |
|
|
|
Avaya Proprietary | 802.1Q Framing | 802.1Q Framing = 1 if tagging or 2 if not. |
|
| Subtype = 7. |
|
| Not applicable. |
Basic Mandatory |
3 of 3
On receipt of a LLDPDU message, the Avaya IP Telephones will act on the TLV elements described in Table 11:
Table 11: Impact of TLVs Received by 1600 Series IP Telephones on System Parameter Values
System | TLV | Impact |
Parameter Name | Name | |
|
|
|
PHY2VLAN | IEEE 802.1 Port | System value changed to the Port VLAN identifier in |
| VLAN ID | the TLV. |
|
|
|
L2QVLAN and | IEEE 802.1 VLAN | The system value is changed to the TLV VLAN |
L2Q | Name | Identifier. L2Q will be set to 1 (ON). |
|
| VLAN Name TLV is only effective if: |
|
| ● The telephone is not registered with the Call |
|
| Server. |
|
| ● Name begins with VOICE (case does not |
|
| matter). |
|
| ● The VLAN is not zero. |
|
| ● DHCP Client is activated. |
|
| ● The telephone is registered but is not tagging |
|
| layer 2 frames with a |
|
| If VLAN Name causes the telephone to change |
|
| VLAN and the telephone already has an IP Address |
|
| the telephone will release the IP Address and reset. |
|
| If the TLV VLAN ID matches the VLAN ID the |
|
| telephone is using, the VLAN ID is marked as set by |
|
| LLDP. Otherwise, if already registered, the |
|
| telephone waits until there are no active calls, |
|
| releases its IP Address, turns on tagging with the |
|
| TLV VLAN ID, sets L2Q to "on," changes the default |
|
| L2Q to "on," and resets. If there is no valid IP |
|
| Address, the telephone immediately starts tagging |
|
| with the new VLAN ID without resetting. |
|
|
|
82 Avaya 1600 Series IP Deskphones Administrator Guide
