Administering Telephone Options
5.Enter the IP netmask followed by the # button. The telephone displays:
FileSv=nnn.nnn.nnn.nnn
New=_
where nnn.nnn.nnn.nnn is the current system value of the HTTP/HTTPS server IP address.
6.Enter the File server followed by the # button.
The telephone displays one of the following texts, depending on the current setting of the system parameter NVL2Q (802.1Q):
If NVL2Q is 0:
If NVL2Q is 1:
If NVL2Q is 2:
802.1Q=auto *=change #=OK
802.1Q=on *=change #=OK
802.1Q=off *=change #=OK
7.Press * to change 802.1Q to the next sequential value. For example, if the current value is 0 (auto) pressing * changes it to 1 (on) and if the current value is 2 (off), pressing * changes it to 0 (auto).
The display is updated to show the current status of 802.1Q.
8.Press the # button to continue the procedure without changing the displayed status of 802.1Q
The telephone displays the following text:
VLAN ID=dddd
New=_
where dddd is the current system value of the 802.1 VLAN ID.
9.Enter a valid value between 0 and 4094 for the new value of the 802.1 VLAN ID. The telephone displays the following message:
VLAN test=ddd
New=_
where ddd is the number of seconds to wait for a DHCPOFFER on a
96 Avaya 1600 Series IP Deskphones Administrator Guide
