Avaya 16-601443, 1600 Series manual Procpswd, Static

Administering Telephone Options

Table 8: 1600 Series IP Telephone Customizable System Parameters (continued)

Parameter Name	Default Value	Description and Value Range
PROCPSWD	" " (Null)	Text string containing the local (dialpad) procedure
		password (Null or 1-7 ASCII digits). If set, password
		must be entered immediately after Mute is pressed and
		before entry of a procedure command (for example,
		VIEW). Intended to facilitate restricted access to local
		procedures even when command sequences are
		known. Password is viewable, not hidden.
PROCSTAT	0	Local (dialpad) Administrative procedures status
		(0=Local procedures enabled, 1=all Administrative
		Options are disabled).
REREGISTER	20	Registration timer in minutes. Controls an H.323
		protocol timer that should only be changed under very
		special circumstances by someone who fully
		understands the system operation impact. Value is
		1-120.
RTCPMON	" " (Null)	Text string containing the 4-octet IP address of the
		RTCP monitor currently in use, in dotted decimal or
		DNS Name format (0-15 ASCII characters, no spaces).
SNMPADD	" " (Null)	Text string containing zero or more allowable source IP
		addresses for SNMP queries, in dotted decimal or DNS
		format, separated by commas, with up to 255 total
		ASCII characters including commas.
SNMPSTRING	" " (Null)	Text string containing the SNMP community name
		string (up to 32 ASCII characters, no spaces).
STATIC	0	Static programming override flag. If set to “0” static
		programming never overrides call server (DHCP) or
		call server administered data. If set to “1” static
		programming overrides only file server administered
		data. If set to “2” static programming overrides only call
		server administered data. If set to “3” static
		programming overrides both file server- and call
		server-administered data. Allows a call server IP
		address that has been manually programmed into a
		telephone to override any value received via DHCP or
		via this configuration file. A manually programmed IP
		address will only be used if it is not 0.0.0.0, so this
		parameter may be used to allow only specific
		telephones to use a different value than otherwise
		provided by this configuration file. If STATIC is to be
		used to select a manual override of file server IP
		address(es), STATIC must be set via DHCP, not via
		this configuration file.
SUBSCRIBELIST	" " (Null)	One or more Push application server subscription
		URLs, separated by commas without any intervening
		spaces (0-255 ASCII characters, including commas).
		5 of 6

72 Avaya 1600 Series IP Deskphones Administrator Guide