Administering Telephone Options
These telephones:
●do not support LLDP on the secondary Ethernet interface.
●will not forward frames received with the 802.1AB LLDP group multicast address as the destination MAC address between the Ethernet line interface and the secondary Ethernet interface.
A 1600 Series IP Telephone initiates LLDP after receiving an LLDPDU message from an appropriate system. Once initiated, the telephones send an LLDPDU every 30 seconds with the following contents:
Table 10: LLDPDU Transmitted by the 1600 Series IP Telephones
Category | TLV Name (Type) | TLV Info String (Value) |
|
|
|
Basic Mandatory | Chassis ID | IPv4 IP Address of telephone. |
|
| MAC address of the telephone. |
Basic Mandatory | Port ID | |
|
| 120 seconds. |
Basic Mandatory | ||
|
| The Host Name sent to the DHCP server in |
Basic Optional | System Name | |
|
| DHCP option 12. |
Basic Optional | System Capabilities | Bit 2 (Bridge) will be set in the System |
|
| Capabilities if the telephone has an internal |
|
| Ethernet switch. If Bit 2 is set in Enabled |
|
| Capabilities then the secondary port is |
|
| enabled. |
|
| Bit 5 (Telephone) will be set in the System |
|
| Capabilities. If Bit 5 is set in the Enabled |
|
| Capabilities than the telephone is registered. |
|
| Mgmt IPv4 IP Address of telephone. |
Basic Optional | Management Address | |
|
| Interface number subtype = 3 (system port). |
|
| Interface number = 1. |
|
| OID = SNMP |
|
| telephone. |
IEEE 802.3 | MAC / PHY | Reports autonegotiation status and speed of |
Organization | Configuration / Status | the uplink port on the telephone. |
Specific |
|
|
|
| Media Endpoint Discovery - Class III - IP |
TIA LLDP MED |
| |
| Capabilities | Telephone. |
|
| 1 of 3 |
|
|
|
80 Avaya 1600 Series IP Deskphones Administrator Guide