Administering Telephone Options

2.After entry of the command sequence, the following displays, based on the current value of the system value NVDEBUG:

If NVDEBUG = 1:

If NVDEBUG = 0:

Debug mode=on 0=off #=OK

Debug mode=off 1=on #=OK

If a value different from the current NVDEBUG value is entered, the following text displays left-justified at the top of the display:

Save new value?

*=no #=yes

3.Press the * button to terminate the procedure, or the # button to save the new value. If you press the # button, the telephone displays the following text:

New value being saved

The telephone saves the new value.

Group Identifier

Use the following procedure to set or change the Group Identifier.

Note:

Perform this procedure only if the LAN Administrator instructs you to do so.

For more information about groups, see The GROUP System Value on page 65.

While the telephone is on-hook and idle, press the following sequence of keys on the faceplate of the telephone:

Mute 4 7 6 8 7 (Mute G R O U P)

Note:

Press the Mute button momentarily. Do not press this button while pressing other keys/buttons.

The following text displays left-justified at the top of the display:

Group=ddd

New=_

where ddd is the Group value.

86 Avaya 1600 Series IP Deskphones Administrator Guide

Page 86
Image 86
Avaya 16-601443, 1600 Series manual Group Identifier, Mute 4 7 6 8 7 Mute G R O U P