2DSR Switch Installer/User Guide
The serial IQ module is a DCE device that provides the primary interface between a serial device and a DSR switch. It provides VT100 terminal emulation, break suppression and port history in a compact, convenient module.
Control of virtual media-capable appliances (select models)
The virtual media enabled DSR switches allow you to view, move or copy data located on virtual media to and from any server. Manage remote systems more efficiently by allowing operating system installation, operating system recovery, hard drive recovery or duplication, BIOS updating and server backup.
Virtual media can be connected directly to the switch using USB ports located on the switch. In addition, virtual media may be connected to any remote workstation that is running DSView® 3 management software and is connected to the DSR switch using an Ethernet connection.
NOTE: Virtual media is available on the following models: DSR1030/2030/4030/8030/1031/2035/8035.
NOTE: To open a virtual media session with a server, the server must first be connected to a virtual media enabled switch using a virtual media capable IQ module (USB2 or USB2L).
Access the DSR switch via a standard TCP/IP network
The Avocent DSR switches provide agentless remote control and access. No special software or drivers are required on the attached, or client, computers.
NOTE: The client connects to the server housing the DSView 3 management software using an Internet browser. For modem access, you must install DSR Remote Operations software included on the DSView 3 software
Users access the DSR switch and all attached systems via Ethernet or using a V.34, V.90 or V.92 modem from a client computer. Clients can be located anywhere a valid network connection exists.
DSView® 3 management software plug-in
The DSView 3 software may be used with the DSR switch to allow IT administrators to remotely access, monitor and control target devices on multiple platforms through a single,
