15
CHAPTER
3
Local Port Operation
Most DSR switch models include a local port on the back. This port enables you to connect a keyboard, monitor and mouse to the switch for direct access. The DSR switches include the OSCAR graphical user interface for configuring your system and selecting target devices.
Basic Operations
Viewing and selecting ports and servers
Use the Main dialog box to view, configure and control target devices in the DSR switching system. You may view the target devices by name, port or by the unique Electronic ID (EID) embedded in each IQ module. You will see an OSCAR
The Port column indicates the port to which a target device is connected.
Selecting a target device
Use the Main dialog box to select a target device. When you select a target device, the DSR switch reconfigures the keyboard and mouse to the settings for the selected target device.
To select a target device:
If the display order of your list is by port (the Port button is depressed), type the port number and press Enter.
If the display order of your list is by name or EID (the Name or EID button is depressed), type the first few letters of the name of the target device or the EID number to establish it as unique and press Enter.
NOTE: If OSCAR Authentication has been enabled, an “Authenticating” screen will appear after you select a target device because the DSR switch is confirming your access to that target device. If you are denied access to the target device, a message will appear saying that you can not view that particular target device.
